470L Build / Setup (Development in Process)

RH47E01XW_DM_01.jpg

MICROBEAST PLUS

Below are the light settings for the MicroBeast Plus used on Alan Szabo Jr. and Gale Align 470LT and 470LM. 

 

PARAMETER MENU
(Menu LED Flashing quickly)
LIGHT SETUP
A Swashplate quick trim/
AttitudeControl trim
Used to trim helicopter, best not to adjust if an early beginner.
B Control Style PRO (RED)
C Speed Fligh Stability MEDIUM* (RED)
D Rudder Rate Consistency MEDIUM* (RED
E Stick Deadzone SMALL* (FLASHING RED)
F Torque Precompensation HIGH-INV (BLUE)
G Cyclic Response INCREASED (RED)
H Pitch Boost OFF* (PURPLE)
I Throttle Response NORMAL* (PURPLE)
J Slow Rampup Speed 200 RPS* (RED)
K Fast Rampup Speed 500 RPS* (RED)
L AttitudeControl Mode DISABLED* (FLASHING PURPLE)
M (AttitudeControl Pitch) NOT USED

en_quickfinder960.gif
Standard Equipment
  • T-REX 470L Dominator Kit x 1
  • Microbeast PLUS Flybarless System x 1
  • RCE-BL50X Brushless ESC x 1
  • 470MX Brushless Motor (1800KV) x 1
  • DS450 HV Brushless Servo x 3 Freq: 200Hz
  • DS455 HV Brushless Servo x 1 Pulse: 1520µs / Freq: 333hz
  • 380 Carbon Fiber Blades x 1 Set
  • 69 Tail Rotor Blade x 1 Set
Image
Specification
  • Length: 755mm - 29.72In
  • Height: 210mm - 8.27In
  • Width: 108mm - 4.25In
  • Main Blade Length: 380mm - 14.96In
  • Main Rotor Diameter: 850mm - 33.46In
  • Tail Rotor Diameter: 181mm - 7.13In
  • Motor Pinion Gear: 11T
  • Main Drive Gear: 121T
  • Main Drive Pulley: 56T
  • Tail Drive Gear: 15T
  • Drive Gear Ratio: 11 : 1 : 3.73
  • Weight (with Motor): 860g - 1.90Lbs
Additional Equipment Required for Assembly
  • Transmitter (7-channel or more, helicopter system)
  • Receiver (7-channel or more)
  • 6S Li-Po 1400 ~ 1800mAh x 1 Recommend 1450mAh Part #: HBP14501
  • Digital Pitch Gauge Part # HET80001
  • Hex Screw Driver Set Part # HOT00002
authorized_align_dealer.png
© 2017 Enterprise Hobby. All Rights Reserved. Designed By dXb Development

Search