700X Build / Setup (Development in Process)
MICROBEAST PLUS
Below are the light settings for the MicroBeast Plus used on the Align T-REX 700X by Alan Szabo Jr. and Gale Align.
| PARAMETER MENU (Menu LED Flashing quickly) |
LIGHT SETUP | |
| A | Swashplate quick trim/ AttitudeControl trim |
Used to trim helicopter, best not to adjust if an early beginner. |
| B | Control Style | PRO (RED) |
| C | Speed Fligh Stability | MEDIUM* (RED) |
| D | Rudder Rate Consistency | MEDIUM* (RED |
| E | Stick Deadzone | SMALL* (FLASHING RED) |
| F | Torque Precompensation | HIGH-INV (BLUE) |
| G | Cyclic Response | INCREASED (RED) |
| H | Pitch Boost | OFF* (PURPLE) |
| I | Throttle Response | NORMAL* (PURPLE) |
| J | Slow Rampup Speed | 200 RPS* (RED) |
| K | Fast Rampup Speed | 500 RPS* (RED) |
| L | AttitudeControl Mode | DISABLED* (FLASHING PURPLE) |
| M | (AttitudeControl Pitch) | NOT USED |
Build Video Series
| Main Blades | Tail Blades | RPM Approx. | Tail Drive Gear | Front Drive Gear | Drive Gear Ration | |
|---|---|---|---|---|---|---|
| Standard | 700 | 106 | 2150 ~ 2200 RPM | 102T | 23T | 8.46 : 1 : 4.43 |
| Re-Fitting | 700 | 106 | 2000 ~ 2150 RPM | 104T | 22T | 8.46 : 1 : 4.73 |
| Re-Fitting | 700 | 106 | < 1900 RMP | 105T | 20T | 8.46 : 1 : 5.25 |
| Caution! excessive head speed above 2200 RPM can damage the helicopter and cause serious harm to property or individuals | ||||||
Electric Equipment
- T-REX 700X Kit x 1
- Microbeast PLUS Flybarless System x 1
- RCE-BL130A Brushless ESC x 1
- 850MX Brushless Motor (490KV) x 1
- DS820M HV Brushless Servo x 3 Freq: 200hz
- DS825M HV Brushless Servo x 1 Pulse: 1520µs / Freq: 333hz
- 700 Carbon Fiber Blades x 1
- 106mm 3K Carbon Fiber Tail Blades x 1
Specification
- Length: 1320mm - 51.97In
- Height: 360mm - 14.17In
- Width: 195mm - 7.68In
- Main Blade Length: 700mm - 27.56In
- Main Rotor Diameter: 1582mm - 62.28In
- Tail Rotor Diameter: 281mm - 11.06In
- Motor Drive Gear: 13T
- Main Drive Gear: 110T
- Autorotation Tail Drive Gear: 104T
- Tail Drive Gear: 22T
- Drive Gear Ratio: 8.46 : 1 : 4.73
- Weight (with Battery): 5100g - 11.24Lbs
Equipment Required for Assembly
- Transmitter (7-channel or more, helicopter system)
- Receiver (7-channel or more)
- 6S Li-Po 4500 ~ 5200mAh x 2 Recommend 5200mAh Part # HB52004
- Digital Pitch Gauge Part # HET80001
- Hex Screw Driver Set Part # HOT00002
Microbeast Manual
Align 700 Manuals
